For my project i have decided to enhance and modify the fence along with the door. In my design specifictations i said that i will make my fence very tall so that people cannot climb over it and so that people can't see what's inside. Also i have said that i will have no gaps or spaces between each fence, which i have done for my final fence design. Also in the design specifications i have said that the fence should be able to keep out stray dogs and cats/ rats and etc... So the new idea i came up with was that i was going to put another piece of wood along the ground and the wood itself blocking and covering every single whole. Also i said that the fence is going to be strong and stable. Which that my new fence is going to be really thick about 8cm's thick. Also the last one was that it is going to be made of wood, which it is.
The height of the fence will be 2 meters and a half.
The length will be 10 cm's
I have also added the window which is a half circle. It is made out of metal bars and is really strong. Also there is a metal cap. Which allows you to close the window whenever yoy want to.
There is also a animal door. It is a plastic flap but at night or whenever you can lock it from the inside.
The door is very simple it is made of wood and metal. The door is attached to the fence and is actually part of the fence and is off the ground. So that it wont't sink later.
I have chosen this design becuase it is cheap and good. Also it is sustainable and very useful. I have done 3 designs and decided to combine all of them. I just took bits and pieces from all of them and just combined them all together and came up with my final design.
Subscribe to:
Post Comments (Atom)
To get a 5 or a 6 on design, you need to do this:
ReplyDelete"The student generates a range of feasible designs, each evaluated
against the design specification. The student justifies the chosen design
and evaluates it fully and critically against the design specification."
I'll need to see all designs and all their evaluations.